Trap setting, Password setting – AirLive Ether-GSH24TW User Manual

Page 38

Text mode
Original mode

Trap Setting

The Trap Setting enables the device to monitor the Trap through
the Web Management Utility, set the Trap IP Address of the
manager where the trap to be sent.

Figure 26. Trap Setting

System Events: Monitoring the system’s trap.

Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong
password login, and it will record from where the IP to
be login.

Password Setting

Password is the invaluable tool for the manager to secure Web
Management Switch, use this function to change the password.
If you forget the password, press the “Reset” button in the rear
panel of the Switch, the current setting includes VLAN, Port
Setting… etc. will be lost and the Switch will restore to the
default setting.

Figure 27. Set Password