AirLive CW-720 - Manual (Page 9)

1. Introduction
AirLive CW-720 User’s Manual 4
1.5.2 Bottom View
1. Audio Output Jack
Audio-out Jack allows this device to output audio or alerting sound.
2. DC Power Jack
The input power is 12VDC.
Note: Supply the power to the Camera with the power adapter included in package.
Otherwise, the improper power adapter may damage the unit and result in danger.
3. Antenna
A user can attach the included antenna to antenna connector ( RP-SMA )
4. Factory Default Reset
This button is hidden in the pinhole. This button is used to restore the all factory default
settings. Sometimes restarting the camera will make the system back to a normal state.
If the system still got problems after restart, a user can restore the factory default
settings and install it again. To restore the device, please follow the steps below:
(1) Insert the paper clip or other tool and press and hold the button down continuously.
(2) Hold it at least 5 seconds and release the tool. Then, the device has been restored
to default settings and reboot again.
Note: Restoring the factory default setting will lose all previous settings included IP
address forever. A user needs to run the IPWizard II program to search the device and
configure it to let the device work properly again.