AirLive CW-720 User Manual
Page 31
4. Monitor the Image Section
AirLive CW-720 User’s Manual
26
In case, a user wants to configure wireless settings manually, please follow the steps as
below:
MAC address:
Displays the Ethernet MAC address of the WLAN card. Note that a user can not change it.
Site survey:
Click the “Refresh” button. It will refresh information window which list is the result of a
network scan. Access points with a disabled SSID Broadcast will not appear unless the
camera is associated with it. The following information is provided:
Interface Select:
“Wired (Ethernet) only” or “Auto – wired if cable connected, otherwise wireless”:
Choose wired or wireless mode. However, note that wired is priority.
Type:
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Security mode:
Shows which type of security the network uses. The device supports three security
methods:
None
WEP
WPA_PSK/WPA2_PSK