5 network advanced – AirLive BU-720 User Manual
Page 48
10. System
AirLive BU-720 User’s Manual
43
10.5 Network Advanced
1. RTSP
- General
z
RTP Port Range: The default value of port range is 5000 ~ 7999 and it can be
changed from 1124 to 65534.
z
RTSP Port: The default value is 554. If the IP Cameras are connected with router
and installed outside over 2 sets, all of them are need support RTSP. Please fill
the value in the blank space in the range from 1124 to 65534.
z
RTSP Configuration: Configure the RTSP by profile, and then enable or disable
the authentication.
- Multicast
z
Status: This can enabled or disabled the multicast.
z
Access Name: This will be shown and changed along with the profile you select.
z
Multicast Address: Specify the multicast server address.
z
Video / Audio Port: Specify the transmission port number of the video data from
1124 to 65534.
z
Time to Live: Set the maximum TTL that multicast can pass through. The default
value is 15.
2. UPnP
If you have a router to access to internet and the router supports UPnP IGD function, you
need to turn on the UPnP Port Forwarding function.
z
HTTP port: Enter the HTTP port number and default HTTP port is 80.
z
SSL port: Enter the SSL port number and default SSL port is 443.
z
RTSP port: Enter the RTSP port, default value is 554 for computer view.
Note: UPnP (Universal Plug and Play): UPnP is a set of computer network protocol.
It allows devices to connect seamlessly and simplify the implementation of
networks in the home and corporate environments.
3. Bonjour
Bonjour, also known as zero-configuration networking, enables automatic discovery of
computers, devices, and services on IP networks. Bonjour uses industry standard IP
protocols to allow devices to automatically discover each other without the need to enter
IP addresses or configure DNS servers.
z
Device Name: Enter Device Name you wish.
Note: How to use Bonjour in your Windows Browser UI? Please check the link
below: