AirLive BU-720 - Manual (Page 12)

2. Package Contents and Installation
AirLive BU-720 User’s Manual 7
1. RJ45 LAN socket: Connect to PC or Hub/Switch.
For 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling connection, this Ethernet
port built N-Way protocol can detect or negotiate the transmission speed of the network
automatically. Please use Category 5 cable to connect the Network Camera to a
100Mbps Fast Ethernet network switch or hub.
In front of the camera, there is a network LED embedded:
Network LED (Flash yellow)
This LED will be flashing while network accessing via Ethernet.
2. DC-in Jack
The input power is 12VDC.
Note that supply the power to the Network Camera with the power adapter included in
package.
3. BNC Connector
The composite video format will be sent out through this connector. User might connect
the IP Camera to a monitor or DVR via this connector.
2.3 Mounting the Camera
Fix the camera with bundle wall mount kit as below.