AirLive AirVideo-2000 - Manual (Page 26)

AirVideo-2000 User’s Manual
23
♦ Start IP: The start IP address of DHCP Server.
♦ End IP: The end IP address of DHCP Server.
♦ Default Gateway: The default value is 192.168.1.1
< Wireless Setup>
♦ SSID: This is SSID of AirVideo-2000. The string length is 32 bytes.
♦ Channel: to set fixed channel or Auto. The “Auto” means after power on AirVideo-2000, it will scan
all of wireless channel and select clear one channel automatically.
♦ WEP: you can Disable WEP key or select one of 64bit or 128bit in ASCII or HEX string.
♦ Key: If WEP is enabled, you have to set key value according to WEP mode you selected.
: press button to select this mode
: press button to abort action.
: Back to Operating mode main menu
4-7 Projection Setup
*** Click [Projection Setup] button
♦ : 1024x768 and 800x600.
♦ : provide AirVideo-2000 output with 16bit or 32 bit color depth. It depends on
your PC settings.
♦ : This is VGA output refresh rate, provides 60 Hz and 75Hz to suit for
different kinds of projectors.
♦ ：Confirmation and Save modifications
♦ : Cancel all the modifications