Echo 73020 Instruction - Manual (Page 2)

Instruction Sheet 2
Figure 2. Bolt blades to disk
OPERATION
The nylon blades are intended for trimming, mowing, and
edging.
Inspect the surrounding area for foreign objects. Keep 1.
the nylon blades away from rocks, stones, glass, metal,
wires, cans, and other non-organic material.
start the engine. Refer to the starting instructions in
2.
the Wheeled Trimmer Owners manual.
Place the trimmer head on the ground and begin
3.
walking slowly to begin cutting.
Refer to instructions in Wheeled Trimmer Owners
4.
manual for using trimming adjustments and the off
center tilt feature.
Keep the wheels on the ground at all times to prevent
5.
undue pressure on the trimmer head and personal
injury.
Keep the nylon blades in good condition for maximum
6.
cutting speed, durability and safety.
SERVICE AND MAINTENANCE
Replace nylon blades as a complete set. •
Do not reuse locknuts more than three times. •
Wear safety glasses during operation. Wear proper
clothing to protect feet, legs, and other exposed body
parts.
WARNING
Place one spacer in each nylon blade. 5.
Bolt nylon blades to the trimmer head disk as shown in 6.
Figure 2. Install so that the nylon blades are under the
trimmer head. Insert the bolts through the bottom of the
trimmer head disk and secure on top with locknuts.
Do not install nylon blades on the trimmer head disk •
top side.
Nylon blades swing freely when properly installed. •