Warning, Attaching debris loader to the trailer – Echo DL12653 Instruction v.3 User Manual
Page 2
ECHO BEAR CAT
www.bearcatproducts.com
237 NW 12th Street, West Fargo, ND 58078-0849
Phone: 701.282.5520 • Toll Free: 888.645.4520 • Fax: 701.282.9522
E-mail: [email protected] • [email protected]
SCREW, #10 X 3/4
PAN HD
LICENSE PLATE
LIGHT
NUT, #10 NYLOCK
NUT, 1/2
WHEEL
WHEEL
WASHER, 1/2 FLAT
NUT, 1/2 NYLOCK
BOLT, 1/2 X 1-1/2 CRG
PIVOTING
JACK
SNAP
RING
BOLT,
3/8 X 5 HEX
SAFETY
CHAIN
WASHER,
3/8 FLAT
NUT, 3/8 NYLOCK
Before placing debris loader on to trailer, secure the
trailer in a manner that it will not move while placing
the loader on to the trailer.
WARNING
ATTACHING DEBRIS
LOADER TO THE TRAILER
1. A hoist or other lifting device will need to be
used to lift the debris loader into place.
2. The following are the weights of the debris
loaders:
DL12653 - 595 lbs. (269.9 kg)
DL 12720 - 675 lbs. (306.2 kg)
Ensure that the lifting device used is rated
and certified to lift more that the total weight
of the machines.
3. Make certain that the orientation of the
loader is correct and set into place on
the trailer, being certain to align the eight
mounting flanges on the frame of the
debris loader with the eight mounting
holes on the trailer.
4. Secure into place using eight 1/2 x 1-1/2"
carriage bolts, washers and nylock nuts.