Echo DL12653 Owners Manual v.2 - Manual (Page 10)

12 Inch Debris Loader
6
Section
ASSEMBLY
1
2
3
4
5
6
7
8
9
10
11
12
13
2
CONNECT HOSE TO MACHINE
1. Attach the 7 3/4" spring(1) and hose support chain (2)
to the hose support arm assembly (3) using the 3/8 x 1
1/4" bolt (4), two washers (5) and lock nut (6).
2. Place hose support arm assembly into mounting hole
on the fan housing.
3. Twist the hose assembly plate (7) on to the machine
using six 5/16' toplock flange nuts (8). Tighten to 17
ft-lbs.
4. Also secure, at left handle location on hose assembly
plate, the 5/16 x 1" bolt (9), two washers (10) and nylock
nut (11).
5. Lift hose assembly (12) and attach the two chains (13)
from hose assembly rings to the hose support arm
assembly at the locations detailed.
6. Secure hose into storage position bracket on housing
until ready for use. (See picture at left.)
2.1 ATTACH THE VACUUM HOSE