2 engine controls – Echo DL10570 Owners Manual v.4 User Manual
Page 12
8 & 10 Inch Debris Loaders
8
FEATURES & CONTROLS
3.2 ENGINE CONTROLS
1. Engine choke: Use when starting a cold engine.
Move to ON position when starting. Move to OFF
position when engine is running. Full choke may not be
necessary when starting a warm engine. In this case,
partial or no choke may work best.
2. Fuel cut-off switch: Move to the ON position to start
and run engine. Move to OFF position when engine
is stopped.
390cc Honda engine controls
570cc Briggs & Stratton engine controls
3. Engine throttle: Changes engine speed. Push lever
all the way to the fast position for full throttle operation.
Push the opposite way for engine idle. Push all the way
to the slow position to shut engine off. Refer to engine
manual for further engine operating instructions.
4. Engine switch: Turn to ON position to start and run
engine. To stop, turn to OFF position.
5. Starter cord: To start, pull the cord until light resistance
is felt and then pull briskly.