Echo TC-210 Serial E14712001001 - E14712999999 - Manual (Page 24)

24 X7504083607
© 9/2014 ECHO Inc.
MAINTENANCE TC-210
3. Disconnect spark plug lead.
4. Remove cylinder cover.
5. Use brush to remove dirt from the cylinder fins.
DO NOT use a metal scraper to remove dirt from the cylinder
fins.
6. Assemble components in reverse order.
Note: When installing the cylinder cover, be certain the muffler
gasket tabs are locked into the muffler grill slots and the
stop switch lead is seated in the relief notch.
Exhaust System
Spark Arrestor Screen
Level 2.
1. Remove starter cover and cylinder cover.
2. Remove exhaust guide (A), gasket (B), and screen (C) from
muffler body.
3. Clean carbon deposits from muffler components.
Note: When cleaning carbon deposit, be careful not to damage
the catalytic element inside muffler.
4. Replace screen if it is cracked, plugged, or has holes burned through.
5. Assemble components in reverse order.
Parts Required: Spark Arrestor Screen, Gasket
A
B
B
A
C