Echo PPT-266H - Manual (Page 17)

PPT-266/H ASSEMBLY
X7702096005 17
© 08/2014 ECHO Inc.
3. Connect 2 ignition stop leads (F, G) from throttle cable
tubing to 2 ignition leads (F, G) on engine.
4. Secure ignition leads behind air filter case with clip (H).
5. Install air filter and cover.
Cutting Attachment to Drive Shaft Installation
Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury
may result
1. Loosen the two (2) screws (A) and remove locator screw (B)
on cutting attachment.
2. Loosen clamp knob (E) turning counter clockwise.
F
G
H
A
B
F
E