Description – Echo 99944200513 User Manual

Page 9

99944200513

DESCRIPTION

X7702093305

DESCRIPTION

Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow
the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See
PARTS ORDERING instructions for specific information.

1. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the flexible drive shaft.

2. SHIELD - Attached to deflect debris away from operator and reduce accidental contact with tines.

3. HUB - Separately attached to axle ends by clevis pin and spring pin. Tines bolt to hubs.

4. TINES - Identical on right and left side from operator's position. See page 12 for optional settings.

5. GREASE ACCESS BOLT - Apply grease to gear housing every 25 hours of use.

6. GEAR HOUSING - Houses gears and ball bearings for driving tines.

7. SERIAL NUMBER LABEL - Also serves as insertion line when drive shaft is properly engaged.

Shaft Label