beautypg.com

Maintenance, Skill levels, Maintenance intervals – Echo 99944200485 User Manual

Page 14: Lubrication, Blades, Level 1, Skill levels maintenance intervals lubrication

background image

14

X7702091904

© 08/2013 ECHO Inc.

MAINTENANCE

99944200485

MAINTENANCE

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and
hot surfaces.

Your ECHO unit is designed to provide many hours of trouble free service. Regular scheduled maintenance
will help your unit achieve that goal. If you are unsure or are not equipped with the necessary tools, you may
want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to
DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is
not listed, see your ECHO Dealer for repairs.

Skill Levels

Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.

ECHO offers REPOWER

TM

Maintenance Kits and Parts to make your maintenance job easier.

Maintenance Intervals

IMPORTANT - Time intervals shown are maximum. Actual use and your experience will determine the
frequency of required maintenance.
[1] Apply POWER BLENDX

TM

grease.

Lubrication

Blades

Level 1.

Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid
touching blades whenever possible, and always wear gloves to protect hands.

Component/System

MAintenance Procedure

Skill Level

Interval

Drive Shaft

Grease

1

Every 25 hours of use [1]

Gear Housing

Grease

1

Every 15 - 25 hours of use [1]

Blades

Lubrication

1

Every 15 - 25 hours of use

Blades

Sharpen

2

As needed

Blades

Adjust

2

Every 40 hours of use

Screws/Nuts/Bolts Inspect/Tighten/Replace 1

Before Each Use

Parts Required:

20W Engine Oil (blade lubrication), 50-50
mixture of kerosene and 20W oil (blade
cleaning)