beautypg.com

Assembly hc-152 – Echo HC-152 User Manual

Page 14

background image

14

X7532249501

© 4/2013 ECHO Inc.

ASSEMBLY

HC-152

4. Remove first four blade locknuts (A) and washers in front of front handle/guard. Do not remove blade

bolts.

5. Tighten blade bolts (B) until snug. Install blade guard, then washers
6. Loosen blade bolts ½ turn. Secure blade guard with new locknuts (A). Hold blade bolts from turning

using a 10mm wrench. Use new locknuts every time blade guard is installed or removed.

Note: Use new locknuts every time blade guard is installed or

removed

If blade guard is damaged or show signs of wear, replace it.

Note: Washers (C) should be movable by hand after blade bolts

are adjusted properly.

C

See also other documents in the category Echo Gardening equipment: