Echo 72928 Owners Manual v.6 - Manual (Page 10)

9 INCH CHIPPER 8
SAFETY
Safety and instruction decals are located on the chipper frame and engine. Replace any decal that is damaged or un-
readable.
1.10 SafeTY decalS
Pn 12169
2
1
Pn 12010
KEEP HANDS AND FEET
OUT OF INlET AND
DISCHARgE OPENINgS WHIlE MA-
CHINE IS OPERATINg TO AvOID
SERIOUS PERSONAl INJURy. Al-
lOW MACHINE TO COME TO A COM-
PlETE STOP BEFORE ClEARINg
OBSTRUCTIONS.
Pn 12172
3
READ AND UNDERSTAND THIS
OWNER/OPERATORS MANUAl.
BE COMPlETEly FAMIlIAR WITH
THE CONTROlS AND THE PROP-
ER USE OF THIS EQUIPMENT
OBTAIN AND WEAR SAFETy
glASSES AND USE HEARINg
PROTECTION AT All TIMES
WHEN OPERATINg THIS MA-
CHINE.
BEFORE INSPECTINg OR SER-
vICINg ANy PART OF THIS
MACHINE, SHUT OFF POWER
SOURCE AND MAKE SURE All
MOvINg PARTS HAvE COME TO
A COMPlETE STOP.
Pn 12173
4
DO NOT OPERATE THIS EQUIP-
MENT IN THE vICINITy OF By-
STANDERS. DO NOT AllOW
CHIlDREN TO OPERATE THIS
EQUIPMENT. AlWAyS STAND
ClEAR OF DISCHARgE AREA
WHEN OPERATINg THIS MA-
CHINE. KEEP FACE AND BODy
AWAy FROM DISCHARgE AREAS.
Pn 12174
5
DO NOT OPERATE MACHINE
WITHOUT SHIElDS IN PlACE.
FAIlURE TO DO SO MAy CAUSE
SERIOUS INJURy OR DEATH.
Pn 12175
6
KEEP HANDS AND FEET OUT
OF INlET AND DISCHARgE
OPENINgS WHIlE MACHINE IS
OPERATINg TO AvOID SERI-
OUS PERSONAl INJURy. Al-
lOW MACHINE TO COME TO
A COMPlETE STOP BEFORE
ClEARINg OBSTRUCTIONS.
Pn 12250
7
CHECK BlADE BOlTS FOR
PROPER TORQUE AFTER Ev-
ERy 8 HOURS OF OPERATION.
CHECK BlADES AND ROTATE
OR RESHARPEN DAIly OR AS
REQUIRED TO KEEP BlADES
SHARP. REFER TO OWNERS
MANUAl FOR INSTRUCTIONS.
FAIlURE TO DO SO MAy CAUSE
POOR PERFORMANCE, DAMAgE
OR PERSONAl INJURy AND WIll
vOID THE MACHINE WARRANTy.
Pn 13711-00
9
READ AND UNDERSTAND
THIS OWNER/OPERATORS
MANUAl. BE COMPlETEly
FAMIlIAR WITH THE
CONTROlS AND THE
PROPER USE OF THIS
EQUIPMENT.
Pn 12183
8
PRESS ClUTCH PEDAl
DOWN WITH FOOT TO
DISENgAgE BElT WHIlE
STARTINg ENgINE. SlOWly
RElEASE FOOT TO ENgAgE
CHIPPER BElT AFTER CHIP-
PER IS RUNNINg.