Echo 73413 Owners Manual v.2 - Manual (Page 7)

4
• Rotate the discharge tube to face the opposite direction of the towing vehicle before
towing. This prevents the discharge tube from projecting over the trailer wheels and
striking foreign objects.
• Connect hitch safety chains. Tighten and secure trailer hitch bolts. Do not attempt
to tow the trailer if vehicle is not equipped with a 2" ball.
• Maximum towing speed is 55 M.P.H. Inflate tires to manufactures specs. as stated
on the tire sidewall. Check wheel lug bolts periodically to ensure they are tight and
secure.
• Make sure the jack stand on trailer is in the UP position to clear the ground during
towing. Place the jack stand on a level surface and secure it in the DOWN position
before use.
• Never allow passengers to ride on the chipper chute while the vehicle is moving,
whether the chipper is running or not.
Torque Chart
Standard minimum tightening
torque for normal assembly
applications.
Bolts (SAE GR5)
Size Ft. Lbs.
5/16" 20
3/8" 35
1/2" 75
5/8" 90
Screws
Size Ft. Lbs.
5/16" Set 15
Safety Instructions-Cont.
Safety Rules for Towing
Additional Safety Rules for PTO Models
• Stay alert and pay attention when PTO chipper is operating.
• Keep bystanders, especially children, away from PTO driveline.
• Connect 3 pt. hitch pins and snap pins, connect PTO driveline, and have leg stands
solidly on the ground when in use to maintain proper spacing.
• Check the driveline to ensure it is attached securely to the tractor.
• Keep guards and shields in place at all times while operating. Disengage tractor
PTO and shut off engine before removing guards or shields.