Echo 74520 Owners Manual v.2 - Manual (Page 16)

Page 12 5" Chipper W/Hyd Feed Owners Manual
3.2 PTO MODELS
1. 3 pt. Hitch Connections: Mount chipper/shredder to
tractor (Fig. # 7). Connect direct for categories 0 & 1.
A bushing kit must be installed on 3 pt. connections
for category 2 hitches.
2. PTO Shaft: Connects tractor PTO to chipper/
shredder drive shaft. Avoid angle greater than 15
degrees up or down when unit is in use.
Controls
3. Leg Stands: Adjustable to allow proper driveshaft
angle. Do not move machine unless the legs clear the
ground.
4. Discharge Lock: Used to pivot the discharge chute.
5. Hydraulic Feed Control: Engages and disengages
the feed roller.
Fig. #7, PTO Chipper Shredder