Echo 74624 Owners Manual v.2 - Manual (Page 9)

7
SAFETY
See Section 1.11 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine and the associ-
ated hazards. See the engine owners manual or contact the engine manufacturer for engine safety instructions and decals. Make
certain that all safety and operational decals on this machine are kept clean and in good condition. the decals are shown below at
reduced sizes. Refer to the parts catalog if you need a replacement decal. decals that need replacement must be applied to their
original locations.
1.10 safeTY decals
kEEP HaNdS aNd FEEt out oF
INlEt aNd dISCHaRgE oPENINgS
WHIlE MaCHINE IS oPERatINg
to avoId SERIouS PERSoNal IN-
JuRy. StoP aNd alloW MaCHINE
to CoME to a CoMPlEtE StoP
bEFoRE ClEaRINg obStRuC-
tIoNS.
PN 12175
5
3
PN 12173
do Not oPERatE tHIS EQuIPMENt
IN tHE vICINIty oF byStaNdERS.
do Not alloW CHIldREN to oP-
ERatE tHIS EQuIPMENt. alWayS
StaNd ClEaR oF dISCHaRgE aREa
WHEN oPERatINg tHIS MaCHINE.
kEEP FaCE aNd body aWay FRoM
dISCHaRgE aREaS.
REad aNd uNdERStaNd tHIS
oWNER/oPERatoRS MaNual.
bE
CoMPlEtEly FaMIlIaR
WItH tHE CoNtRolS aNd tHE
PRoPER uSE oF tHIS EQuIP-
MENt.
PN 13711-00
7
1
2
4
6
PN 12010
CAUTION
TO OPERATE AUTO FEED:
TO ACTIVATE THE AUTO FEED SYSTEM.
TURN SWITCH TO "ON" POSTITION.
TO ACTIVATE THE MANUAL FEED SYSTEM.
TURN SWITCH TO "OFF" POSTITION.
WHEN USING THE AUTO FEED SYSTEM,
RUN ENGINE AT FULL SPEED, FEED MATERIAL
INTO CHIPPER AND STAND CLEAR. CHIPPER
WILL AUTOMATICALLY START AND STOP THE
FEED ROLLER.
REFER TO OPERATION AND MAINTENANCE
MANUAL FOR ADDITIONAL INSTRUCTION.
PN 12737
PN 12737
PN 14049-00
PN 14302-00