Echo CH5540H Owners Manual v.3 - Manual (Page 7)

3 5 INCH CHIPPER
ENGLISH
OPERATION
1.6 pTo saFeTY (conT.)
1.7 saFeTY Decal locaTions
See Section 1.8 for decal descriptions. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owners manual for engine safety instructions and decals. Make certain
that all safety and operational decals on this machine are kept clean and in good condition. Refer to the parts catalog if
you need a replacement decal. decals that need replacement must be applied to their original locations.
5. Keep guards and shields in place at all times while operating. disengage PTO, shut off power source, and make
sure all moving parts have come to a complete stop before removing guards or shields.
6. Clothing worn by operator must be fairly tight. Never wear loose fitted jackets, shirts, or pants when working around
the PTO. Tie long hair back or put under a cap.
7. Keep hydraulic hoses, electric cords, chains and other items from contacting the driveline.
8. Proper recommended PTO operating speed is 540 +/- 10 RPM.
9. Before inspecting or servicing the PTO drive area, disengage the driveline, shut off power source, remove ignition
key, and make sure all moving parts have come to a complete stop.
10. Keep hands, feet, and clothing away from all PTO drive parts.
11. DO NOT clean, lubricate or adjust the PTO shaft when it is running.
4
1
6 *
* LOCATED INSIDE
CHUTE
9
3
2
5
7
8