Echo 76624 Instruction v.2 - Manual (Page 2)

Instruction Sheet
CONNECTING ThE WIRES
The wire harness is connected to the new tray. Find the red/black and red wires coming from this wire harness. 1.
Connect these wires to the back of the Momentary Push Button Switch.
To attach the Momentary Push Button Switch to the Switch Box, start by knocking out the knock-out plug. The
2.
Switch Box is located on the hopper.
SMALL SCREW
TAKE OFF THIS NUT WHEN PUTTING
THE SWITCH ON THE CONTROL
BOX
PUSH BUTTON
KNOCK-OUT PLUG
WHERE THE MOMENTARY
PUSH BUTTON SWITCH WILL
GO ON THE SWITCH BOX
Take apart the Momentary Push Button Switch before installing it in the knock-out plug opening. To take the switch 3.
apart, loosen the small screw that holds the silver-colored button to the Push Button Switch base (gold colored).
Position the button and the base in the cutout on the Switch Box. One nut will be placed on either side of the black 4.
box. After you have positioned the button and the base, make sure the pieces are tightened with the small screw.