Echo 72928 Owners Manual v.7 - Manual (Page 9)

9 INCH CHIPPER 5
SAFETY
Safety and instruction decals are located on the chipper frame and engine. Replace any decal that is damaged or unreadable.
1.9 SafeTY DeCalS
Pn 12169
2
1
KEEP HANDS AND FEET OUT OF INlET AND
DISCHARgE OPENINgS WHIlE MACHINE
IS OPERATINg TO AVOID SERIOUS PER-
SONAl INJURy. AllOW MACHINE TO COME
TO A COMPlETE STOP BEFORE ClEARINg
OBSTRUCTIONS.
Pn 12172
3
READ AND UNDERSTAND THIS
OWNER/OPERATORS MANUAl.
BE COMPlETEly FAMIlIAR WITH
THE CONTROlS AND THE PROP-
ER USE OF THIS EQUIPMENT
OBTAIN AND WEAR SAFETy
glASSES AND USE HEARINg
PROTECTION AT All TIMES
WHEN OPERATINg THIS MA-
CHINE.
BEFORE INSPECTINg OR SER-
VICINg ANy PART OF THIS
MACHINE, SHUT OFF POWER
SOURCE AND MAKE SURE All
MOVINg PARTS HAVE COME TO
A COMPlETE STOP.
Pn 12173
4
DO NOT OPERATE THIS EQUIP-
MENT IN THE VICINITy OF By-
STANDERS. DO NOT AllOW
CHIlDREN TO OPERATE THIS
EQUIPMENT. AlWAyS STAND
ClEAR OF DISCHARgE AREA
WHEN OPERATINg THIS MA-
CHINE. KEEP FACE AND BODy
AWAy FROM DISCHARgE AREAS.
Pn 12174
5
DO NOT OPERATE MACHINE WITH-
OUT SHIElDS IN PlACE. FAIlURE TO
DO SO MAy CAUSE SERIOUS INJURy
OR DEATH.
Pn 12175
6
KEEP HANDS AND FEET OUT
OF INlET AND DISCHARgE
OPENINgS WHIlE MACHINE IS
OPERATINg TO AVOID SERI-
OUS PERSONAl INJURy. Al-
lOW MACHINE TO COME TO
A COMPlETE STOP BEFORE
ClEARINg OBSTRUCTIONS.
Pn 12250
7
CHECK BlADE BOlTS FOR
PROPER TORQUE AFTER EV-
ERy 8 HOURS OF OPERATION.
CHECK BlADES AND ROTATE
OR RESHARPEN DAIly OR AS
REQUIRED TO KEEP BlADES
SHARP. REFER TO OWNERS
MANUAl FOR INSTRUCTIONS.
FAIlURE TO DO SO MAy CAUSE POOR PERFORMANCE, DAM-
AgE OR PERSONAl INJURy AND WIll VOID THE MACHINE
WARRANTy.
Pn 13711-00
READ AND UNDERSTAND THIS
OWNER/OPERATORS MANUAl.
BE COMPlETEly FAMIlIAR
WITH THE CONTROlS AND THE
PROPER USE OF THIS
EQUIPMENT.
Pn 12183
8
PRESS ClUTCH PEDAl DOWN
WITH FOOT TO DISENgAgE BElT
WHIlE STARTINg ENgINE. SlOW-
ly RElEASE FOOT TO ENgAgE
CHIPPER BElT AFTER CHIPPER
IS RUNNINg.
Pn 18983-00 9
FEED ROllER SUPPORT MUST
BE SECURED IN THE UP POSI-
TION PRIOR TO SERVICINg
CHIPPER FEED AREA. FEED
ROllER CAN FAll AND CAUSE
SEVERE BODIly HARM. CON-
SUlT OWNERS MANUAl FOR
PROPER METHOD OF SECURINg FEED ROllER SUPPORT.
lOWER FEED ROllER BEFORE OPERATINg CHIPPER.