Echo CS-550P Serial C10712001001 - C10712999999 - Manual (Page 6)

4 CS-550P
TO AVOID KICKBACK
1. Hold the chain saw firmly with both
hands.
2. Don’t let the nose of the guide
bar contact any obstruction.
3. Tip contact may suddenly move the
guide bar upward and backward,
which may cause serious injury.
Part Number 890191-30131
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Wear eyes, ears and head
protection
Carburetor adjustment
- Low speed mixture
Oil and gasoline mixture
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Decompression device Chain brake operation
Chain oiler adjustment
Chain oil fill
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
Emergency stop
Choke control “Cold Start”
position (choke closed)
SYMBOL FORM
Part Number X524-003550
REPLACEMENT BAR AND CHAIN
GUIDE BAR* CHAIN*
PART NO. PART NO.
16” 16F0LD3366 20LPX66CQ / 20BPX66CQ
18” 18F0LD3372 20LPX72CQ / 20BPX72CQ
20” 20F0LD3378 20LPX78CQ / 20BPX78CQ
*Or equivalent
Note: There may be other replacement
components for achieving kickback
protection. For details, please refer
to the chain and bar combination
sheet shown in the instruction manual.
WARNING!! Read and follow all safety
precaution in the instruction manual.
Failure to follow instructions could
result in serious personal injury.
WARNING!!
Read and follow all safety
precaution in the instruction
manual