Maintenance and care, Skill levels, Maintenance intervals – Echo CS-550P Serial C10712001001 - C10712999999 User Manual
Page 25
23
CS-550P
MAINTENANCE AND CARE
IMPORTANT
Time intervals shown are maximum.
Actual use and your experience will determine
the frequency of required maintenance.
Your ECHO chain saw is designed to provide many
hours of trouble free service. Regular scheduled
maintenance will help your chain saw achieve that
goal. If you are unsure or are not equipped with the
necessary tools, you may want to take your unit to
an ECHO Service Dealer for maintenance. To help
you decide whether you want to DO-IT-YOURSELF
or have the ECHO Dealer do it, each maintenance
task has been graded. If the task is not listed ask
your ECHO dealer for repairs.
SKILL LEVELS
Level 1 = Easy to do. Most required tools come
with unit.
Level 2 = Moderate difficulty. Some specialized
tools may be required.
ECHO offers REPOWER™ Maintenance Kits and
Parts to make your maintenance job easier. Just
below each task heading are listed the various part
numbers required for that task. Ask your ECHO
dealer for these parts.
MAINTENANCE INTERVALS
Meintenance Procedure Letter Codes:
I = Inspect
C = Clean
R = Replace
Meintenance Procedure Notes:
(1)= Low evaporative fuel tanks DO NOT require
regular maintenance to maintain emission
integrity.
* = All recommendations to replace are based
on the finding of damage or wear during
inspection.
Component/system
Maintenance procedure
Air Filter
Inspect/Clean/Replace
1
I/C*
R*
Automatic Oiler
Inspect/Adjust
1
I
Oil Filter
Inspect/Clean/Replace
1
I
I/C*
Fuel System
Inspect/Replace
1
I (1)*
I (1)*
Fuel Filter
Inspect/Replace
1
I*
I/R*
Fuel Cap Gasket
Inspect/Replace
1
I*
R*
Guide Bar and Sprocket Nose
Inspect/Clean/Lubricate
1
I/C*
I
Saw Chain
Inspect/Sharpen/Replace/
Tensioning
2
I*
Sprocket
Inspect/Replace
2
I*
Spark Plug
Inspect/Clean/Replace
1
I/C/R*
Cooling System
Inspect/Clean
2
I/C
Muffler Spark Arrestor
Inspect/Clean/Replace
2
I/C/R*
Cylinder Exhaust Port
Inspect/Clean/Decarbon
2
I/C
Recoil Starter Rope
Inspect/Clean
1
I/C*
Screws/Nuts/Bolts
Inspect/Tighten/Replace
1
I*
Every refuel
Required
Skill level
Daily or
Before use
3 Months or
90 Hours
Yearly or
600 Hours