Echo CS-360T Serial C04412001001 - C04412999999 - Manual (Page 11)

11
o
peRation
IMPORTANT
This saw features a combination ignition/choke switch that automatically sets the throttle speed to fast idle for
quick starting. Do not squeeze trigger during cold starts until after unit has started, or fast idle and choke set-
tings will be released, and engine may not start.
CHAIN LUBRICANT
Proper lubrication of the chain while in operation reduces fric-
tion between the chain and the guide bar to a minimum and
assures a longer service life.
• Use bar and chain oil of high quality for this purpose.
• Do not use used or reclaimed oil to avoid various oiler
problems.
• Use ECHO bar and chain oil.
• When ECHO bar and chain oil is not available:
Use motor oil, etc.
• Use bar and chain oil of the following grades:
SAE NO. 30 ..... in summer
SAE NO. 10 ..... in winter or when cutting resinous trees.
• When refueling, also refill chain oil.
FUEL TANK OIL TANK
TANK INDICATION
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from
all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a com-
plete stop before removing obstructions, clearing debris, or servicing unit.
After use
• DO NOT store a unit with fuel in its tank. Leaks can
occur. Return unused fuel to an approved fuel storage
container.
Storage - Fuel storage laws vary by locality. Contact
your local government for the laws affecting your area.
As a precaution, store fuel in an approved, airtight con-
tainer. Store in a well-ventilated, unoccupied building,
away from sparks and flames.
IMPORTANT
Stored fuel ages. Do not mix more fuel than you
expect to use in thirty (30) days, ninety (90) days
when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALWAYS
shake fuel container thoroughly before each use.
WARNING
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to
prevent discharge of hot particles from the engine. Metal blade use also can create sparks if the blade strikes
rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention
requirements.
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Wear eyes, ears and head
protection
Carburetor adjustment
- Low speed mixture
Gasoline and oil mixture
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Chain oiler adjustment Chain brake operation
Chain oil pump
Chain oil fill
Emergency stop
Choke control “Cold Start”
position (choke closed)
STOP
I
NTERNATIONAL
S
YMBOLS
Read and understand
Operator's Manual.
WARNING
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause uncon-
sciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is
directed away from your face and body.