Installation – IOGear GWP514 User Manual

Page 26

Text mode
Original mode

Installation

Note: The IP Address you assign to all computers
must be in the same IP Address range, and the
Subnet Mask must be the same for all computers
on your network.

For example:

If the first computer is assigned an IP Address of 10.35.1.3 with
a Subnet Mask of 255.255.255.0, then the second computer can
be assigned an IP Address of 10.35.1.4 with a Subnet Mask of

255.255.255.0,.. etc.

5. After completing IP configuration information,

click 7. Type “ipconfig” at the D:\> prompt to
determine OK to both “Internet Protocol (TCP/
IP) Properties” if the TCP/IP configuration has
taken effect. and “Local Area Connection
Properties” to complete the IP configuration.