Step 2: setup the receiver – IOGear GWHDMS52 User Manual

Page 13

Text mode
Original mode

Step 2: Setup the Receiver
HDTV Connection with receiver:

1. Connect the supplied mini USB power

adapter to the DC IN jack of the receiver
and a wall socket. The POWER LED
indicator lights up in green when the
receiver is connected to power.

2. Connect either a USB based Keyboard

or Mouse to the USB port on the back of
the receiver.
*(IOGEAR Wireless AV Multimedia
Keyboards with trackball make a perfect
companion: GKM561R, GKM681R,
GKM581R and GKM571R)

3. Connect an HDMI cable to the HDMI OUT

jack of the receiver and to the HDMI-IN
on the HDTV (or an HD projector).
Press the Source button on your receiver
or the left and right arrows button on the
remote to select the appropriate “HDMI”
video input.

4. Plug in the IR sensor extender cable

provided. Please refer to page 14, Step 3
of the Hardware Installation section.

HD Projector or HD Flat Penel TV