IOGear GVE320 - Manual (Page 4)

TMDS DDC
TMDS DDC
EQ
TMDS DDC
EQ
TMDS DDC
OUT
STEP 2
Connect one end of the HDMI cable to your display unit’s input and connect
the other end to the HDMI Out port of the receiver unit of the HDMI Extender.
STEP 3
Plug in one of the Cat 5e/6 cables to DDC of both sender and receiver unit
of the HDMI Extenders. Make sure the connection is not loose.
STEP 4
Plug in the second Cat 5e/6 cable to TMDS of both sender and receiver
unit of the HDMI Extenders. Make sure the connection is not loose.
Receiver unit
Display
Receiver unit Sender unit
Receiver unit Sender unit