IOGear GCS982U - Manual (Page 14)

14
Hotkeys Summary Table
Hotkey combination Description
[Scroll Lock] [Scroll Lock] +
or
[Ctrl] [Ctrl]* +
*Note: If alternative hotkey
sequence is chosen
[Enter] Switch KVM and audio focus to the next port
[k] [Enter] Switch KVM focus to the next port
[s] [Enter] Switch audio focus to the next port
[a] [Enter]
Activate Autoscan Mode. It will toggle between the two computers every
5 seconds
[a]/[n], [Enter]
Activate Autoscan Mode. It will toggle between the two computers with the
specific time depending on the interval [n] that you have input. Please see
Autoscan Interval Table for details.
[x] [Enter] Change hotkey sequence to the alternative sequence
[m] [Enter] Enable/disable mouse emulation
[d] [Enter] Capture and store monitor’s EDID on specific port
[w] [Enter]
Enable/disable mouse port-switching function
Note: If you enable this feature when Mouse Emulation Mode is disabled,
Mouse Emulation Mode will be enabled automatically
[F2] [Enter] Enable Mac keyboard emulation
[F3] [Enter] Enable Sun keyboard emulation