IOGear GCS982U - Manual (Page 13)

13
You can switch ports via remote switch button,
mouse or hotkey commands.
Port Switching via Remote Switch Button
Simply press the remote switch button once to
switch focus to the next port.
Port Switching via Mouse
Simply press scroll wheel button twice rapidly to
switch focus to the next port.*
*Note: This feature requires a mouse that has a
scroll wheel. Also, this feature can only be used
when both Mouse Emulation Mode and Mouse
Port-Switching Mode are enabled.
Port Switching
Port Switching via Hotkey Commands
To trigger a Hotkey Mode, simply press [Scroll
Lock] [Scroll Lock]**. Please refer to Hotkey Sum-
mary Table for details.
**Note: If there is a conflict using [Scroll Lock]
[Scroll Lock] sequence, you can change to the
alternative sequence [Ctrl] [Ctrl] by press and
holding the remote switch button for 3 seconds.
When you press and hold the remote switch
button for 3 second when the sequence is [Ctrl]
[Ctrl], it will change the sequence back to [Scroll
Lock] [Scoll Lock].