IOGear GBS301 Quick Start - Manual (Page 12)

Any time that you want to pair the Bluetooth serial device with
a new Bluetooth adapter/device, you must follow the
unpairing procedure as indicated below.
There are two different methods that you can follow to unpair
the Bluetooth serial adapter
Method 1
1. Power OFF the serial adapter
2. Change the position of Dip Switch 4
3. Power ON the serial adapter. The LED will blink once,
indicating successful unpairing.
4. Power OFF the serial adapter
5. Change dip switch 4 back to its original position
6. You can now pair the Bluetooth serial adapter with
another device
Method 2
If using two (2) IOGEAR Bluetooth serial adapters, follow the
back-to-back pairing procedure indicated earlier; which will
retain the latest pairing information
Unpairing Procedure
10