IOGear GBHFK331 - Manual (Page 16)

16 17
Connect Speakerphone to your Bluetooth enabled cellular phone
Turn on the Bluetooth connection 1.
on your phone and enable the
pairing mode of the Bluetooth con-
nection. Make sure your phone and
the Speakerphone is no more than
3 feet apart.
Make sure the Car Kit is powered
2.
off. Long press the MFB button of
the Speakerphone for 6 seconds
to enter the pairing mode. User will
see slue and red LED flash.
Your cellular phone will now start 3.
to look for the Speakerphone.
When the Speakerphone is found,
your phone will display
“GBHFK331” from the list of
devices, “Enter PIN code 0000”.
Enter “0000” and press OK to
establish the connection.
“pairing successful” will be
4.
announced