BT DECTfax - Manual (Page 9)

Want to register a handset to more than one
base station.
Want to allocate a handset with a handset
number other than the next sequential one.
1 At the base station press Function , then 8 ,
then 8 , then Function again.
2 At the handset press OK then 9 , then use the
▲ and ▼ buttons to scroll to the first empty
location, indicated by a line of dashes in the
display.
3 Press OK . The telephone icon flashes in the
display.
4 After a few seconds the display shows four
dashes (
- - - - ) to prompt you to enter the
handset security code
5 Enter the code that is on the base station,
either 0000 or whatever you have changed
it to.
6 Press OK and the display will show the
available handset numbers ( 1-4 ).
7 Press the number you want on the keypad -
the display will show this number to indicate
that the handset is registered.
9
Setting up
TU
V
8
TU
V
8
WX
Y
Z
9