BURY Motion - Manual (Page 8)

8
Installation of the hands-free car kit
With the help of a suction pad you can attach the BURY Motion to the
windscreen. To do this, use the press-stud on the Window Mount in
order to either increase or decrease the pressure on the suction pad.
To do this, use the press-stud on the Window Mount in order to either
increase or decrease the pressure on the suction pad. If you press
down on the press stud from top to bottom then the suction pad at-
tachment loosens again.
Step 3:
Attaching the plug-in external Microphone
Please connect the microphone jack with the BURY Motion.
Step 4:
The power supply connection
Connect the BURY Motion with the cigarette lighter plug. Plug the ciga-
rette lighter plug into the appropriate connector in your vehicle.
When using the ISO power supply cable, please comply with the in-
structions in the documentation about your vehicle and radio concer-
ning the Pin allocations on the ISO-plugs. The Cinch plugs are for trans-
ferring the audio signals. It is possible that the radio in your vehicle has
other inputs. The corresponding adapters are available through your
specialist retailer.
2 1
4 3
click