BURY Motion - Manual (Page 12)

12
Operating guidelines
9. Establishing a Bluetooth connection
If you wish to establish a Bluetooth connection between your mobile and the HFCK for the first time,
you have to activate the Bluetooth function of your mobile phone and search for Bluetooth ® devices.
In this case, search for a device labelled „BURY Motion…“. If several devices were identified, please
select the HFCK and enter the PIN number „1234“. The
Bluetooth connection (pairing) will then be
established between your mobile phone and the HFCK. Next, press down on the ‚Pair‘ button in order
to create the connection with the HFCK.
In addition it is possible that you must delete all devices connected to your mobile phone first in
order to enable a correct identification of the HFCK and the establishment of a connection.
Note:
If the rechargeable battery of the mobile phone is low, it is sometimes not possible to X
establish a
Bluetooth connection.
The Bluetooth connection is interrupted if you deactivate the Bluetooth function on your iPhone
or you interrupt the supply of power to the BURY Motion. In addition, the connection is discon-
nected, if you move too far away from the vehicle while taking your mobile phone with you and
thus leave the reception radius of the HFCK.
Please note that the capacity of your mobile phone‘s storage battery can quickly decrease when
the
Bluetooth function is active. If you do not want to use the Bluetooth function anymore, e.g. if
you leave the vehicle for a longer period, it is recommended to deactivate this function.