Using the telephone – BT CONVERSE 325 User Manual

Page 8

Converse 325 ~ Issue 3 – 2nd Edition ~ 23rd July ’03 ~ 5528

To make a call

Lift the handset off the base
and wait for the dial tone.

Dial the telephone number.

The display will show the
number dialled.

Preparatory dialling.

Without lifting the handset,
dial the telephone number you
want. The display shows the
number to be dialled.

Press the

Dial button.

The number shown in the
display is dialled in ‘handsfree’
mode.

To end a call

Replace the handset.

To receive a call

When the telephone rings, the
Call indicator light will flash to
indicate that there is an
incoming call. Simply pick up
the handset.

To set the call timer

You can time the duration of
each call.

During a call press the

Clock

button. The time of the
previous call will be displayed.

Press the

Clock button again

to start the timer. You can stop
the time by pressing the

Clock

button once more.

Using the telephone

Note

There are 3 ways to make a call on
your Converse 325: by lifting the
handset, using the

Handsfree button

or by using the

Dial button.

Note

If you make a mistake, use
the

ᮤ Clear button to edit

the number you have entered.

USING

Hearing Aid Compatibility

As this telephone is fitted with an
Inductive Coupler, Hearing Aid
wearers may benefit from switching
their hearing aid to the middle

position and holding the earpiece up

to the aid, not their ear.