BT CONVERSE 325 User Manual

Page 11

Converse 325 ~ Issue 3 – 2nd Edition ~ 23rd July ’03 ~ 5528

USING

To adjust the ringer tone

The ringer tone can be set to
High or Low.

Use the ringer tone switch on
the underside of your
Converse 325 to set the ringer
tone you want:

R1 for LOW or

R2 for HIGH.

To adjust the call volume

During a call, you can adjust
the volume of a call.

When using Handsfree:

Press the

VOL + or VOL -

button to increase or decrease
the volume.

One-Touch and Two-Touch
memories

You can store 20 telephone numbers in
your Converse 325. 10 in the One-Touch
memory and a further 10 in the
Two-Touch memory.

Please note that stored numbers can be
no longer than 21 digits.

To store a One-Touch number

Use the label to keep a note
of each One-Touch and
Two-Touch numbers.

Press the

Store button.

Note

One-Touch memory buttons
6-10 (the bottom 5 buttons)
are pre-set with BT Calling
Features numbers (see
‘Using Calling Features’).
These can be overwritten if
you wish by following the
instructions below.

RINGER

Note

The call indicator light will flash
regardless of the ringer setting chosen.

To adjust the ringer volume

There are 3 volume settings to
choose from: HI, LOW or OFF.

Use the ringer volume switch
on the underside of your
Converse 325 to set the volume
you want:

HI, LOW or OFF.

When using the handset or a
headset:

Press the

Amplify button.

Press the

VOL + or VOL -

button to increase or decrease
the volume.

HI
LOW
OFF