JLG 3969electric ANSI Service Manual User Manual
Page 9
SECTION 1 - SPECIFICATIONS
3120768
– JLG Sizzor –
1-3
KEY TO LUBRICANTS:
HO - Hydraulic Oil -Kendall Hyken 052
EPGL - Extreme Pressure Gear Lube
NOTE: Be sure to lubricate like items on each side of the
machine.
Recommended lubricating intervals are based on
machine operations under normal conditions. For
machines used in multi-shift operations and/or
exposed to hostile environments or conditions, lubri-
cating frequencies must be increased accordingly
Table 1-4. Lubrication Chart
INDEX
NUMBER
COMPONENT
NO/TYPE LUBE
POINTS
LUBE/METHOD
INTERVAL
HOURS
COMMENTS
1
Hydraulic Oil
Fill Cap/Drain Plug
HO-Kendall Hyken 052
8/800
Check oil every 8 hours of operation.
Change oil every 800 hours of operation.
2
Torque Hub
Fill Plug/Half Full
EPGL-SAE 90
2000
Check oil level at side plug on hub.
3
Wheel Bearings
N/A
MPG - Repack
800
2 years
4
Sliding Pads
Wear Pads (8)
MPG - Brush
50
N/A
5 (not s hown)
Hydraulic Filter Element
N/A
Replaceable Element
40/250
Replace filter element after first 40 hours of
operation then every 250 hours thereafter.
Figure 1-1. Lubrication Chart