JLG 450A_AJ Series II Parts Manual User Manual
Page 265
4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM INSTALLATION
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.
Ref
PLATFORM ASSEMBLY WITH GATE
Use 1001144025
Ref
6ft (1.83m) with No Mesh (was p/n 3510832)
B/L
Use 1001144026
Ref
5ft (1.52m) with No Mesh (was p/n 3510831)
B/L
Use 1001144027
Ref
4ft (1.22m) with No Mesh (was p/n 3510830)
B/M
Ref
Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform
before ordering parts.
Ref
Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref
Note: Replacement Decals Must Be Ordered Separately -
See DECAL SECTION.
1
Not Used
0
2
2080040
16
Fastener, Huck
3
2600281
2
Hinge, Self-Closing
4
2940074
1
Latch
5
3820020
2
Rivet, Pop
6
See Note
0
Platform Weldment (Note: Purchase Platform Assembly)
7
3520072
1
Cap-Plug
8 to 10
Not Used
11
1
Gate Weldment Options:
4846452
Gate for Original Equipment Platform p/n 3510830,
3510831, 3510832
1001144629
Gate for Service Replacement Platform p/ns 1001144025,
1001144026, 1001144027
12
3520198
2
Plug, Square Tube
Ref
PLATFORM ASSEMBLY WITH DROP-BAR
Use 1001144020
Ref
6ft (1.83m) with No Mesh (was p/n 1001138433)
B/B
Use 1001144019
Ref
5ft (1.52m) with No Mesh (was p/n 1001138432)
B/B
Use 1001144018
Ref
4ft (1.22m) with No Mesh (was p/n 1001138431)
B/B
Ref
Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref
Note: Replacement Decals Must Be Ordered Separately -
See DECAL SECTION.
51
0100011
AR
Compound, Locking
52
0641418
2
Bolt 1/4in-20NC x 2-1/4in
53
0961845
2
Bushing
54
3290606
2
Nut M6
55
3300151
2
Nut, Acorn
56
See Note
1
Platform Weldment (Note: Purchase Platform Assembly)
57
3520198
2
Cap-Plug
58
4010618
2
Screw M6 x 50mm
59
4711400
4
Flatwasher 1/4in
60
4811700
2
Flatwasher M6
61
1001138494
1
Bar, Drop
62
1001138514
1
Rail (Top)