JLG G12-55A Parts Manual - Manual (Page 77)

ATTACHMENTS
31200728 G10-55A, G12-55A 3-21
Figure 3-8 Forks & Attaching Parts
Item Part Number Qty. Description Rev.
2340037 6 48 IN (1219 mm) CUBING FORKS, 2 IN X 2 IN (50 mm X 50 mm),
11,640 LB (5280 kg) A
2340045 2 48 IN (1219 mm) PALLET FORKS, 2.36 IN X 4 IN (60 mm X 102 mm),
13,700 LB (6300 kg) A
2340038 2 48 IN (1219 mm) PALLET FORKS, 2.36 IN X 5 IN (60 mm X 127 mm),
13,700 LB (6300 kg) A
2340046 2 60 IN (1524 mm) LUMBER FORKS, 1.75 IN X 7 IN (44 mm X 178 mm),
16,300 LB (7500 kg) A
2340039 2 60 IN (1524 mm) LUMBER FORKS, 2.36 IN X 6 IN (60 mm X 152 mm),
16,300 LB (7500 kg) A
1001092391 2 72 IN (1828 kg) DUEL TAPER FORKS, 2 IN X 6 IN (50mm X 152 mm),
11,300 LB (5120 kg) A
1001093465 Ref FORK PIN LOCK INSTALLATION, (not available to order, see items 1 thru 5 for
service) B
1 0240156 1 FORK PIN LOCK ATTACH
2 1001093273 1 FORK PIN LOCK ATTACH
3 1001093377 2 HITCH PIN
4 1001094830 4 WIRE ROPE CLAMP
5 1001094330 2 PIN LOCK LANYARD
1001137512 2 90 IN FORK EXTENSION, (includes items 101 & 102) A
101 70024306 1 PIN
102 70024307 1 CLIP
N1 Note Ref FORKS RATED LESS THAN THE ATTACHMENT OR MACHINE’S CAPACITY
DECREASE CAPACITY OF THE ATTACHMENT OR MACHINE TO THAT OF
THE FORKS. FORKS RATED MORE THAN THE ATTACHMENT OR
MACHINE’S CAPACITY DO NOT INCREASE ATTACHMENT OR MACHINE’S
CAPACITY.
N2 Note Ref PLEASE CONSULT JLG PARTS DEPARTMENT TO DETERMINE THE
CORRECT FORKS APPLICABLE TO YOUR SPECIFIC CARRIAGE
ASSEMBLY & APPLICATION.