JLG G6-23A Operator Manual - Manual (Page 70)

Section 5 - Attachments
5-6 31200192
Example
A contractor owns a model xxxxx telehandler with a fork carriage. He knows this
attachment may be used with his model since:
• The attachment and fork model/option numbers match the attachment and fork
numbers on the capacity chart.
• The capacity chart is clearly marked for model xxxx and corresponds with
machine configuration being used.
Below are examples with various conditions the contractor may encounter and
whether or not the load may be lifted.
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
Load Weight Distance Height OK to Lift
1 4,250 lb (1928 kg) 6.5 ft (2,0 m) 18.5 ft (5,6 m) Yes
2 3,400 lb (1542 kg) 10 ft (3,0 m) 9.5 ft (2,9 m) NO
3 6,450 lb (2926 kg) 2 ft (0,6 m) 15 ft (4,6 m) Yes
4 6,100 lb (2767 kg) 6 ft (1,8 m) 6 ft (1,8 m) NO
OAH0960
XXXXX
P/N 1234567
P/N 9876543
P/N 9876541
XXXXXXX
0°
10°
20°
30°
40°
50°
60°
A
B
C
3500 lbs
4000 lbs
4600 lbs 6600 lbs
2500 lbs
5600 lbs
0' 4' 8' 12' 16'
0'
4'
8'
12'
16'
20'
28'
-4'
3000 lbs
24'
24”
Example 2
Example 1
Example 4
Example 3