JLG 1500SJ Parts Manual User Manual
Page 192
4-4
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.
Ref
PLATFORM ASSEMBLIES:
Ref
8ft (2.44m) with No Mesh
Use 1001144023
Ref
Prior to SN 0300165379 (was p/n 3510822)
J
1001144023
Ref
SN 0300165379 to Present
B
Ref
6ft (1.83m) with No Mesh
Use 1001144024
Ref
Prior to SN 0300165379 (was p/n 3510833)
I
1001144024
Ref
SN 0300165379 to Present
B
Ref
4ft (1.22m) with No Mesh
Use 1001144027
Ref
Prior to SN 0300165379 (was p/n 3510830)
M
1001144027
Ref
SN 0300165379 to Present
B
Ref
Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref
Note: Replacement decals must be ordered separately - See
DECAL SECTION.
Ref
Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be purchased
to accommodate limit switch locations.
Ref
Note: When replacing platform on machines with SkyCutter
option, new bracket p/n 1001145405 must be purchased to
accommodate SkyCutter components.
1
0100040
AR
Adhesive
2
2080040
16
Fastener, Huck
3
2600281
2
Hinge, Self-Closing
4
2940074
1
Latch
5
Not Used
6
Not Available
1
Platform Weldment (Note: Not Available - Purchase
Platform Assembly)
7
1
Cap-Plug Options:
3520072
Prior to SN 0300162808
1001144630
SN 0300162808 to SN 0300168487
3520072
SN 0300168487 to Present
8
4
Rivet Options:
Use 3820020
Prior to SN 0300077331 (was p/n 3800205)
3820020
SN 0300077331 to Present
9
Not Used
10
1
Gate Weldment Options:
4846452
Prior to SN 0300162808
1001144629
SN 0300162808 to Present
11
3520198
2
Square Tube - Plug