JLG M600 Operator Manual - Manual (Page 25)

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121217 – JLG Lift – 2-5
Function Check
Perform the Function Check as follows:
1. From the ground control panel with no load in the plat-
form:
a. Check that all guards protecting the switches or
locks are in place.
b. Operate all functions and check all limiting and cut-
out switches.
c. Check auxiliary power (or manual descent).
d. Ensure that all machine functions are disabled
when the Emergency Stop Button is activated.
2. From the platform control console:
a. Ensure that the control console is firmly secured in
the proper location;
b. Check that all guards protecting the switches or
locks are in place;
c. Operate all functions and check all limiting and cut-
out switches;
d. Ensure that all machine functions are disabled
when the Emergency Stop Button is pushed in.
e. With machine in the transport (stowed) position,
drive on a grade (not to exceed the rated gradeabil-
ity) and stop to ensure the brakes hold;
f. With machine in the transport (stowed) position,
check the tilt sensor indicator light to ensure proper
operation.