JLG 500RTS ANSI Parts Manual - Manual (Page 18)

1-12 400RTS 500RTS 3120697
SECTION 1 FRAME
210 0920084 2 Drive Brake Assembly (See Figure 1-5 for Breakdown) (Prior to
S/N 36645)
0920110 2 Drive Brake Assembly (See Figure 1-5 for Breakdown)
(S/N 36645 to Present)
211 3311801 4 Nut 1/2"-13NC
212 4711800 4 Flatwasher 1/2"
— — — — — — — — — —
0100011 A/R Loctite #242
0251660 Ref. WHEEL DRIVE INSTALLATION - 4WD/4WS FRONT
FRONT AND REAR (2MPH) B
301 2780191 4 Drive Hub/Brake Assembly (See Figure 1-7 for Breakdown)
302 3160158 4 Drive Motor Assembly (See Figure 1-4 for Breakdown)
303 0642014 24 Bolt 5/8" - 11NC x 1 3/4"
304 4762000 24 Lockwasher 5/8"
305 0641810 8 Bolt 1/2"-13NC x 1 1/4"
306 4761800 8 Lockwasher 1/2"
307 3300012 36 Nut, Wheel
Ref. TIRE AND WHEEL INSTALLATIONS:
Ref. STANDARD 31-15.5 x 15 —
0250888 Ref. PRIOR TO S/N 115825 —
0273457 Ref. S/N 115825 TO PRESENT A
Ref. OPTIONAL 12 x 16.5 LOADER LUG Options:
0251261 Ref. PRIOR TO S/N 44590 —
0258395 Ref. S/N 44590 TO PRESENT 1
0259697 Ref. OPTIONAL 31 x 13.5 x 15 STRAIGHT RIB (S/N 67581 TO
PRESENT) 1
Ref. Note: Assemblies may require ballast/foam filling to manu-
facturer’s specifications prior to installing on a machine.
Refer to Operation & Safety or Service & Maintenance Man-
uals. Purchase individual tire and/or rim only if able to foam
fill tire & wheel assembly, otherwise, purchase complete
assembly.
Tire and Wheel Assembly - Left Side Options:
2 Standard 31-16.5 x 15 Options:
0250886 Prior to S/N 115825 B
0273412 S/N 115825 to Present A
Optional 12 x 16.5 Loaded Lug Options:
0251260 2 Prior to S/N 44590 —
0258393 2 S/N 44590 to Present 1
0259695 2 Optional 31 x 13.5 x 15 Straight Rib
Tire and Wheel Assembly - Right Side Options:
2 Standard 31-16.5 x 15 Options:
Use 0273413 Prior to S/N 115825 (was p/n 0250887) B
0273413 S/N 115825 to Present A
Optional 12 x 16.5 Loaded Lug Options:
0251259 2 Prior to S/N 44590 —
0258394 2 S/N 44590 to Present 1
0259695 2 Optional 31 x 13.5 x 15 Straight Rib
FIGURE 1-3. TIRE AND WHEEL DRIVE INSTALLATIONS (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.