JLG 2505 Operator Manual - Manual (Page 49)

Section 3 - Controls and Indicators
3-11 31200359
LSI Override Switch (2505)
The LSI override switch (9) momentarily disables the automatic function cut-out.
• Before S/N 0160042694
CE - Depress and hold top of switch while operating joystick to momentarily
disable the automatic function cut-out.
AUS - Depress and hold top of switch up to 30 seconds while operating joystick
to momentarily disable the automatic function cut-out.
S/N 0160042694 & After
Depress and hold top of switch up to 30 seconds while operating joystick to
momentarily disable the automatic function cut-out.
• Release switch to re-enable the automatic function cut-out.
WARNING
TIP OVER HAZARD. Exceeding lift capacity of the telehandler could damage the
equipment and/or cause tip over.
OAL1331
9