JLG 41AM (3120873-2013) Parts Manual - Manual (Page 71)

3120873 20AM 25AM 30AM 36AM 41AM 2-39
SECTION 2 CONTROLS
FIGURE 2-12. CABLES AND CONTROLS INSTALLATION (PRIOR TO S/N 0900028703)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. CABLES AND CONTROLS INSTALLATIONS (WITHOUT ITEM
#105 JUNCTION BOX)
0258449 Ref. 20AM (DC Machines) E
0258591 Ref. 20AM (AC Machines) F
0258593 Ref. 30AM (AC Machines) G
0258453 Ref. 41AM (DC Machines) E
0258595 Ref. 41AM (AC Machines) G
1 0100011 A/R Compound, Locking
2 0641410 1 Bolt 1/4in-20NC x 1-1/4in
3 0641612 1 Bolt 3/8in-16NC x 1-1/2in
4 to 6 Not Used
7 0861207 1 Control Box Assembly:
7020078 1 Switch, Push-Pull (Red)
7020088 2 Switch, Push Button (White)
7020089 1 Switch, Push Button (Green)
7020091 1 Plug
Use 7027299 1 Connector, Strain Relief (was p/n 7020092)
7020093 4 Screw M3 x 25mm
8 to 9 Not Used
10 1 Harness Platform Control Options:
4922657 20AM DC Machines A
4923070 20AM AC Machines B
4923082 30AM AC Machines B
4923093 41AM DC Machines A
4923094 41AM AC Machines B
1060687 Cable, Electrical - 16/5 Options:
25.3ft/7.4m 20AM DC Machines
26.5ft/8.1m 20AM AC Machines
37.5ft/11.4m 30AM AC Machines
49.5ft/15.1m 41AM (DC Machines)
50.5ft/15.4m 41AM (AC Machines)
4460145 3 Terminal, Fork (Not Shown - AC Models Only)
4460115 5 Terminal, Fork 16GA
11 Not Used
12 2 Clamp Options:
1320238 Prior to S/N 0900012138
1320149 S/N 0900012138 to S/N 0900028703
13 to 14 Not Used
15 3311405 1 Locknut 1/4in-20NC
16 3311605 2 Locknut 3/8in-16NC
17 3570923 1 Plate, Decal Mounting
18 A/R Sheave, Control Cable Options:
3580231 Prior to S/N 0900024346
3580344 S/N 0900024346 to S/N 0900028703
19 3820032 4 Rivet
20 Not Used