JLG 41AM (3120873-2013) Parts Manual - Manual (Page 19)

3120873 20AM 25AM 30AM 36AM 41AM 1-13
SECTION 1 BASE
FIGURE 1-3. OUTRIGGER COMPONENTS INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. OUTRIGGER ASSEMBLIES
0258814 Ref. 20AM/25AM G
0258815 Ref. 30AM H
0258821 Ref. 30AM (Australian Spec Machines with Outdoor Wind Spec
Requirements Built Prior to S/N 0900030915) G
0258816 Ref. 36AM/41AM G
Ref. Note: Qty shown is for one outrigger jack. Complete
machine requires 4x the qty listed.
1 0100011 A/R Compound, Locking
2 0100035 A/R Compound, Locking
3 0641410 1 Bolt 1/4in-20NC x 1-1/4in
4 0641624 1 Bolt 3/8in-16NC x 3in (Prior to S/N 0900012074)
0641622 1 Bolt 3/8in-16NC x 2-3/4in (S/N 0900012074 to Present)
5 Use 0962288 2 Bushing, Molded Nylon Insulator (S/N 0900016557 to Present)
(Prior to S/N 0900016557 - was p/n 2540024 (Grommet)
6 1220015 1 Cap, End
7 2560127 1 Handle
8 2840019 1 Screw, Jack
9 3020035 A/R Lubricant, Silicone
10 3300380 1 Locknut, Flanged (Prior to S/N 0900031663)
11 2 Locknut #8-32NC Options:
3300392 Prior to S/N 0900016557
3300440 S/N 0900016557 to Present
12 3311405 1 Locknut 1/4in-20NC
13 3311605 1 Locknut 3/8in-16NC
14 Use 1001133151 1 Pad, Jack (was p/n 3340712)
15 3780200 3 O-Ring (S/N 0900016557 to Present)
16 3900193 2 Screw, Countersunk #8-32NC x 3/4in
17 4280291 1 Pad, Contact
18 Beam, Outrigger Options:
4567732 1 20AM/25AM
4567733 1 30AM (Indoor Use)
4567736 1 30AM (Australian Spec Machines with Outdoor Wind Spec
Requirements Built Prior to S/N 0900030915)
4567734 1 36AM/41AM
19 4711600 2 Washer 3/8in (Narrow)
20 4740434 5 Washer, Nylon #8
21 4751400 2 Flatwasher 1/4in Wide
22 4751600 A/R Flatwasher 3/8in Wide (Prior to S/N 0900031663)
23 4891800 1 Flatwasher 1/2in Hardened (Prior to S/N 0900031663)
24 0741407 2 Screw, Countersunk 1/4in-20NC x 7/8in
25 4220178 1 Stop, Outrigger
26 Not Available 1 Nameplate - Outrigger
27 3820006 4 Rivet