JLG 1250AJP Parts Manual User Manual
Page 219
4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.
Ref.
PLATFORM ASSEMBLIES
Ref.
8ft (2.44m) with No Mesh
Use 1001144023
Ref.
Prior to S/N 0300168212 (was p/n 3510822)
J
1001144023
Ref.
S/N 0300168212 to Present
B
Ref.
6ft (1.83m) with No Mesh
Use 1001144024
Ref.
Prior to S/N 0300168212 (was p/n 3510833)
I
1001144024
Ref.
S/N 0300168212 to Present
B
Ref.
Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See Section 10 for Mesh
Installations.
Ref.
Note: For Fall Arrest Platform Machines See Section 10.
Ref.
Note: Replacement Decals Must Be Ordered Separately -
See Section 8.
Ref.
Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref.
Note: When replacing platform on machines with
SkyCutter option, new bracket p/n 1001145405 must be
purchased to accommodate SkyCutter components.
1
Not Used
2
2080040
16
Fastener, Huck
3
2600281
2
Hinge, Self-Closing
4
2940074
1
Latch
5
Not Used
6
Not Available
1
Platform Weldment (Purchase Platform Assembly)
7
1
Cap-Plug Options:
3520072
Prior to S/N 0300162288
1001144630
S/N 0300162288 to Present
8
3820020
4
Rivet
9
Not Used
10
1
Gate Weldment Options:
4846452
Prior to S/N 0300162288
1001144629
S/N 0300162288 to Present
11
3520198
2
Square Tube - Plug