JLG 660SJ Parts Manual User Manual
Page 326
7-28
SECTION 7 ELECTRICAL
202
AR
Harness, Generator Options: (Does not include plug ends)
600S without 7500W Generator
4922889
ANSI, ANSI Export, Australian, Brazilian, CSA, Japanese
Specs (69.5ft/21.8
m
of 12/3 ANSI Spec Cable P/N
1060494)
4922884
CE & Latin American Specs (69.5ft/21.8
m
of 12/3 CE
Spec Cable P/N 1060461)
4923660
ANSI, ANSI Export, CSA Specs (69.5ft/21.8
m
of 12/3
Cable P/N 4923463) (With Arctic Package)
Use 4922792
600S with 7500W Generator (83ft/25.3m
of 8/5 Cable P/N
1060945) (For Arctic Machines p/n was 4923658)
660SJ without 7500W Generator
4922888
ANSI, ANSI Export, Australian, Brazilian, CSA,
Japanese, Latin American Specs (77ft/23.5m of 12/3
ANSI Spec Cable P/N 1060494)
4922886
CE Specs (77ft/23.5m of 12/3 CE Spec Cable
P/N 1060461)
4923510
ANSI, ANSI Export, CSA Specs (77ft/23.5m of 12/3
Cable P/N 4923463) (With Arctic Package)
Use 4922791
660SJ with 7500W Generator (90.5ft/27.6m
of 8/5 Cable
P/N 1060945) (For Arctic Machines p/n was 4923630)
203
AR
Cable, Limit Switch Options:
600S:
1061026
1
ANSI, ANSI Export, Australian, Brazilian, CE, CSA, Latin
American, Japanese Specs (25.5ft/7.8m
of 18/2 Cable
P/N 1060680)
4923659
1
ANSI, ANSI Export, CSA Spec (25.5ft/7.8m
of 18/2
Cable P/N 4923466) (With Arctic Package)
1061027
2
ANSI, ANSI Export, Australian, CSA, Brazilian, Japanese
Specs (13.5ft/4.2m
of 18/2 Cable P/N 1060680)
660SJ:
1061027
1
ANSI, ANSI Export, Australian, Brazilian, CSA, Latin
American, Japanese Specs (13.5ft/4.2m
of 18/2 Cable
P/N 1060680)
1061026
1
Brazilian, CE, Japanese Specs (25.5ft/7.8m
of 18/2
Cable P/N 1060680)
4923511
1
ANSI, ANSI Export, CSA Spec (13.5ft/4.2m
of 18/2
Cable P/N 4923466) (With Arctic Package)
204
4460865
1
Plug, Connector (19 Pin)
205
4460466
4
Seal, Plug
206
4460473
1
Clamp, Cable
207
4100026
AR
Sleeve, Nylon (Required on 600S Only - Not Shown)
10ft/3.0m
USA Built Machines SN 0300087000 to SN 0300137883
4ft/1.2m
USA Built Machines SN 0300137883 to SN 0300171769
4ft/1.2m
China Built Machines SN B300000100 to Present
Ref
GROUND CONTROL BOX COMPONENTS
301
Not Used
302
0100048
AR
Grease, Dielectric
303 to 324
Not Used
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION (WITH UGM) (CONTINUED)
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.