JLG 660SJ Parts Manual User Manual
Page 225
4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.
Ref
PLATFORM ASSEMBLY WITH GATE:
Ref
USA Built Machines:
Use 1001144027
Ref
Platform 30in x 4ft (76cm x 1.22m) (SN 0300087000 to
SN 0300168215) (was p/n 3510830)
B/M
1001144027
Ref
Platform 30in x 4ft (76cm x 1.22m) (SN 0300168215 to
SN 0300171769)
B
Use 1001144026
Ref
Platform 30in X 5ft (76cm x 1.52m) with No Mesh
(SN 0300087000 to SN 0300168215) (was p/n 3510831)
B/L
1001144026
Ref
Platform 30in X 5ft (76cm x 1.52m) with No Mesh
(SN 0300168215 to SN 0300171769)
B
Use 1001144024
Ref
Platform 36in X 6ft (91.5cm x 1.83m) with No Mesh
(SN 0300087000 to SN 0300168215) (was p/n 3510833)
B/I
1001144024
Ref
Platform 36in X 6ft (91.5cm x 1.83m) with No Mesh
(SN 0300168215 to SN 0300171769)
B
Use 1001144023
Ref
Platform 36in X 8ft (91.5cm x 2.44m) with No Mesh
(SN 0300087000 to SN 0300168215) (was p/n 3510822)
B/J
1001144023
Ref
Platform 36in X 8ft (91.5cm x 2.44m) with No Mesh
(SN 0300168215 to SN 0300171769)
B
Ref
China Built Machines:
Use 1001146180
Ref
36in x 72in (0.9m x1.83m) with No Mesh (SN B300000100 to
SN B300000668) (was p/n 1001114335)
B/D
1001146180
Ref
36in x 72in (0.9m x1.83m) with No Mesh (SN B300000668 to
Present)
B
Use 1001146179
Ref
36in x 96in (0.9m x 2.44m) with No Mesh (SN B300000100 to
SN B300000668) (was p/n 1001114391)
B/D
1001146179
Ref
36in x 96in (0.9m x 2.44m) with No Mesh (SN B300000668 to
Present)
B
Ref
Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform
before ordering parts.
Ref
Note: For Platforms with Mesh to the Top Rail, customer
must order Platforms and Mesh separately. See SPECIAL
OPTIONS SECTION for Mesh Installations.
Ref
Note: Replacement Decals must be ordered separately -
See DECALS SECTION.
Ref
Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref
Note: When replacing platform on machines with
SkyCutter option, new bracket p/n 1001145405 must be pur-
chased to accommodate SkyCutter components.
1
Not Used
2
2080040
16
Fastener, Huck
3
2600281
2
Hinge, Self-Closing
4
2940074
1
Latch
5
Not Used
6
See Note
1
Platform Weldment (Note: Purchase Complete Platform
Assembly.)
7
1
Cap-Plug Options:
3520072
USA Built Machines
China Built Machines